Size 8 | Front | EasyCare EasyShoe Roller
Details
Size 8 | Front | EasyCare EasyShoe Roller
The EasyShoe Roller is a hybrid shoe with an aluminum roller bonded to urethane. The Roller has integrated frog support by 3D HoofCare and cuffs for easy gluing. Aluminum and urethane are bonded together without adhesives, eliminating extra weight and height.
The Roller is designed with therapy in mind. The rolled toe will ease tendon and ligament strain by reducing leverage at the toe. Cuffs are designed for acrylic or urethane adhesives.
Please note: The EasyShoe Roller is sized independently and not related to traditional shoe sizes. Please measure your horse's hooves and utilize our Fitting Assistant to determine the correct size.
Key Benefits
- Hybrid shoe with an aluminum roller bonded to urethane
- Integrated frog support by 3D HoofCare
- Designed with therapy in mind
- Rolled toe helps ease tendon and ligament strain by reducing leverage at the toe
- Extra heel material can be shaped as needed
How to Use
- Use with acrylic or urethane adhesives.
- Cut the cuffs off to nail the shoe.
- Cut the caudal support out to shape the shoe.
- Use nippers, rasp, or grinder to remove extra material and match the hoof's length.
Size Chart
| Size | Width (mm) | Length (mm) |
|---|---|---|
| 3 | 98 to 104 | 110 |
| 4 | 104 to 110 | 115 |
| 5 | 110 to 115 | 120 |
| 6 | 115 to 121 | 127 |
| 7 | 121 to 127 | 135 |
| 8 | 127 to 133 | 140 |
| 9 | 133 to 138 | 145 |
| 10 | 138 to 145 | 150 |
| 11 | 145 to 152 | 158 |
How to Properly Measure Your Horse's Hoof
- After a fresh trim, measure the width of the hoof across the bottom at the widest point.
- Measure the length of the hoof from the toe to the buttress line of the heel. The buttress line is the farthest weight bearing point of the heel where the hoof wall ends. Do not include the heel bulbs in the measurement.
- Compare your measurement with the appropriate size chart. Please note that each boot style has its own unique size chart.
- Ideally, the length and width measurement will fit into the same size. If the length and width measurements indicate different sizes, select the larger size. If the hoof measurements fall closely to the maximum length or width, we recommend choosing the next size up. If the width and length measurements are different by more than one size, your selected boot style is not recommended. Be sure to check your measurements against an alternative boot in the EasyCare line, another style may accommodate your horse’s hoof shape better.
- Note: If you are fitting an Easyboot Glue On or Glove, width and length must fall into the same size category.

Fitting Assistant Instructions
- Use a late model smartphone or a digital point and shoot camera with an LCD screen and memory card.
- If using a digital camera, the best setting to use will be Auto or Portrait mode. Avoid the Macro setting, denoted with a small flower because you will need to be within inches of your subject and there is a very small or shallow depth of field. This can cause blurry pictures.
- Do not use flash because it washes out the subject. Use natural light with no shadows. It is optimal to photograph in an even shaded area. Avoid bright sun, deep shade or mottled shade.
- Take the picture on a clean and level surface that is free from clutter, your tools, hoofjack, shavings or straw.
- Use a rubber mat or cement or pavement in the barn aisle for the horse to stand on if one is available.
- Clean your horse’s hooves meticulously. Use a stiff brush to clean all mud, dirt, debris from the wall, sole, frog, collateral grooves and heels.
Once all the prep work is done, it is time to take the pictures. Stand the horse on the level ground with a leg at each corner. The horse should be loading each hoof equally. Avoid a stretched out stance and resting or cocked hind legs.
Taking Pictures
- Take your pictures in sequential order:
- Left Front:
- a. Left front lateral or medial, from the side. Lateral is on the outside of the hoof. Medial is on the inside of the hoof.
- b. Left front dorsal, from the front.
- c. Left front caudal, from behind.
- d. Left front solar, from beneath.
Do the same series on the right side, and for other hooves you would like us to evaluate. This will help to know which hoof you are looking at when you are labeling your pictures. It will be easier if you always shoot in the same order.
- To take the pictures, position yourself perpendicular to the horse or hoof. For hoof shots, get your camera down on the ground and perpendicular to the hoof. Caudal and solar shots need to be from directly over and square to the heels or sole. Important: fill your screen with the subject, allowing only a small margin surrounding the subject. Load the photos onto your computer.
- Label each photo accurately before uploading them with the Fitting Assistant form below.

Frequently Asked Questions
How do I find my horse's size?
Which adhesive do I use with the EasyShoe Roller?
What can I use the EasyShoe Roller for?
Can I reset the EasyShoe Roller?
Can I add a wedge to the EasyShoe Roller?
Video Library





Ratings & Reviews
No reviews available
Be the first to Write a Review



